How to Replace the Replacement Key Battery For the saab 9-5 key replacement 9-3

Saab owners have a unique set of steps to add the second key. It requires dealer service with a handheld computer called Tech-2. Then the transponder must be replaced and a key have to be purchased.

Change your keys regularly to prevent one from deteriorating faster than the other. This will also keep your keys in good condition.

Replacement Case

The new key fobs for keys are not like the older Saab keys. They have electronics that make it difficult to copy. This has made stealing cars significantly more difficult than 20 years ago. However, it has also made replacing lost keys a more costly endeavor.

Every owner of a 9-3 Saab should have at least two functioning keys. If one is lost, it is expensive to purchase a new one for the car because it involves replacing the CIM module, and then reprogramming the locking cylinders. Dealers charge between $100 and $200 to do this.

There are ways to reduce these costly costs. Some parts providers will find the code on a spare key (usually the same one that opens the doors and switches the ignition) and cut a brand new key blade out of metal for just a fraction of dealer cost. The key must, however, be the same as the original to work correctly in your car.

You can also change the case yourself by following these steps. You’ll need an open-faced screwdriver and patience. With the screwdriver you can pull apart the plastic, and then take off the emergency key. Once you have the case open, take the electronics out and put them in your new case. Insert the correct key and badge inside the case.

Replacement Battery

The replacement battery for the Saab 9-3 is an affordable component that can be replaced easily and quickly. This video tutorial on DIY from YouTube user Cyclone Cyd explains how to open a saab 93 without a key to replace the battery in the remote key fob in just four steps. This guide should work with any modern-day saab 9 3 key replacement key fob though the process may vary slightly.

The first step is to locate the button that releases the backup key in the fob. This button is usually located on the back of the fob, right next to the saab 9-3 key not accepted contact service Logo. Use a flathead to insert the screwdriver in the small hole in this button. This should be enough to unlock the fob’s case to allow you to replace the battery.

After the new battery CR1632 is in place You can then reassemble the remote key fob and then program it to your car. The entire process shouldn’t take more than one hour. It is a very simple procedure that doesn’t require any special equipment.

The process can be a bit more complicated if you lose your key, but still possible. The dealer must first read the VIN of the vehicle, and then purchase a replacement TWICE module and key blade with the proper unique code. After that, they’ll have to cut the replacement key and then program it using a brand new tool for programming called MDI.

Replacement Key Fob

The key fob is the device that locks and unlocks your car, it has a battery within. The batteries last for a period of and eventually fail. It is a common problem that affects all cars. The good news is that you can replace the battery in all key fobs, without having to replace the entire case. Amazon sells replacement fobs with all the electronic components installed. It is easy to remove the case and replace the batteries. It is important to remember that you’ll need remove the emergency key first. you can do this by putting the small screwdriver flathead into the slot found in the middle of the case. The screwdriver should be moved around the case, and it should split open, making it much easier to remove.

If you’re ready to change your keys, keep a spare on hand. This will save you a significant amount of money. If you do have a spare, you can request that the dealer cut the new key and program it to your car, which is much cheaper than replacing the entire key fob.

If you don’t have a spare car key, you can add an additional key to your car, but it requires a lot of research and effort. It costs around a hundred dollars to purchase an additional car key. The computer in the vehicle must also be programmed. Professionals can accomplish this however it’s a costly option.

Replacement Ignition

The latest SAAB 9-3 features an advanced alarm system based on a key code. This means that when you lose your sole working key, adding an additional one could be extremely expensive since the car has to have a unique computer module added and it also must be specially programmed to accept an additional key. Dealers can charge hundreds of dollars to program the new key in the event that they are unable to complete the task.

If you’ve lost your only working key the dealer will replace your car’s computer (known as the CIM or saab car key replacement TWICE) in order to make the replacement, and will charge top dollar for it. Instead we can reprogramme the EEPROM of your current car computer to allow it to be programmed to accept a second key, and save you over 50% of the price you be charged at a dealership.

If you’ve been a long-time owner of an 03-11 SAAB 9-3, then you probably have noticed that the ignition switch isn’t all that robust. They can become extremely sticky and the buttons are known to be removed from them occasionally It is recommended that you consider replacing your ignition key if it isn’t working as it should. The good news is that replacing the ignition key isn’t as complicated as it seems and can be done fairly quickly using the right tools.