How to Replace the Replacement Key Battery For the saab key fob programming 9-3

Saab owners must follow a set of steps that are unique to add a second ignition key. It requires dealer assistance using an electronic handheld computer called Tech-2. Then a new key and transponder are required to be purchased and then programmed to the car.

Rotate your keys to prevent one from wearing out more than the next. This will also ensure that your keys remain in pristine condition.

Replacement Case

The new key fobs for keys are not like the old Saab keys. They are equipped with electronics which make it hard to duplicate. This has made theft of cars considerably more difficult than it was years ago. It also makes it more costly to replace keys that were lost.

saab car keys 9-3 owners must have two keys working. It is costly to replace a lost key as it requires replacing the CIM module, as well as reprogramming the locking cylinders. Dealers usually charge between $100-$200 to complete this.

There are ways to avoid these costs. Some parts suppliers will use the code of the spare key to cut a brand new metal blade for a fraction of that of a dealer. The key must be the exact identical to the original one for it to work in your vehicle.

Follow these steps to replace the case. You will need to have an open-faced screwdriver and a lot of patience. With the screwdriver you can pull apart the plastic and remove the emergency key. Once the case is open remove all electronics and place them into the new case. Place the key with the correct badge inside the case.

Replacement Battery

The Saab 9-3 replacement battery is a cheap part that can be quickly and easily replaced. This video tutorial on DIY from YouTube Cyclone Cyd, a user on YouTube, explains how to replace the battery of the remote key fob in only four steps. This tutorial is compatible with any modern Saab key fob. However, the procedure could differ slightly.

The first step is to find the button that opens the backup key in the fob. It’s usually near the Saab 9-3 Key logo on the back of the fob. Then use an screwdriver with a flat head to insert into the tiny hole in this button. This should be sufficient to open the case so that you can replace the battery.

After the new battery CR1632 is in place it is possible to reassemble the remote key fob and then program it to your car. The procedure should take no more than an hour or less. It is a simple process that does not require any special equipment.

If you lose your key, the process is more complicated but it is still able to be accomplished. The dealer will first need to read the VIN of the vehicle, and then purchase an alternative TWICE module, as well as a key blade that has the correct unique code. The dealer will then need to program the key using MDI an innovative software tool.

Replacement Key Fob

The key fob is the part that locks and unlocks your car, it has an internal battery. Batteries have a limited lifespan and will eventually die. It’s a common issue in all vehicles. The good news is you can replace the battery in all key fobs, without having to replace the entire case. Amazon sells replacement fobs that already have all the electronic components in place. It is easy to open the case and replace the batteries. It is important to remember that you’ll need to remove the emergency key first, and you can accomplish this by inserting a small flathead screwdriver into the slot located in the middle of the case. Use the screwdriver to move around the case until it is split open, making it simple to take it out.

If you’re ready to change your keys, be sure to have a spare on hand. This will save you a lot of money. If you have an extra key, you can request the dealer to cut it in half and program it to your car. This is much less expensive than purchasing a new fob.

If you don’t have a spare you can add another key to your car, however this will require a lot of research and effort. It costs around a hundred dollars to add an additional car key. The computer of the vehicle must also be programmed. Professionals can do this however it’s a costly option.

Replacement Ignition

The latest SAAB 9-3 is an alarm system that is more sophisticated built on a keycode. If you lose only one key, it could be costly to replace it with another one, as the car has to be equipped with a specific computer and be programmed to accept a new key. Dealers can even charge hundreds of dollars to program an additional key if they are unable to do it.

Dealers will charge you a high price to replace your car computer (also called the CIM or saab car keys twice) when you lose your only working key. Instead we can reprogram the EEPROM in your current car computer to make it ready for an additional key, slashing over 50% of what you’d spend at a dealer.

If you’ve been a long-time owner of a 03-11 SAAB 9-3, you probably have noticed that the ignition switch isn’t all that durable. If your ignition key is not working correctly, you should think about replacing it. They can become extremely sticky and the buttons can fall off. Luckily, replacing the ignition key isn’t as complicated as it sounds, and it is fairly easy to do using the proper tools.