How to Find a Fiat 500 Spare Key

fiat punto locked keys in car‘s iconic Fiat 500 has become an icon since its relaunched in 2007. The company has now kicked off a bigger offensive towards different powertrains with a mild-hybrid version.

The replacement of key fob batteries on a Fiat 500 are simple and inexpensive. The Fiat main dealer will provide the key in about 10 days.

Troubleshooting

The key fob is equipped with an electronic chip that communicates with your Fiat’s immobiliser system to ensure that only authorised vehicles are able to start engines. If the transponder chip in your key fob is damaged, it won’t be able to link up to the immobiliser unit and this means that your car won’t be able to start.

It is possible to repair the key fob that has been damaged, as long as the chip isn’t physically damaged. A professional locksmith can help with this issue, and they’ll utilize the standard technology of dealers to repair it quickly and effectively.

Utilizing an OBD scanner, it’s possible to determine if your fob is still communicating with the receiver module. This is a simple procedure and can provide an initial indication of where the problem lies. If the OBD scanner says there is no communication between the receiver and transmitter modules, it might be necessary for the fob’s transmitter module to be replaced. This is a costly solution and should be left to a locksmith.

Dead Coin Battery

The most common cause of a key fob that isn’t working is a dead coin battery. It’s an easy fix that takes minutes. First, make sure that the key fob is within the range of your vehicle. Press the “Lock” and “Unlock” buttons to see whether they respond.

If the key fob isn’t in range, it might not be responsive at all, or it may only function intermittently. This could also be a sign that the circuit board inside the key fob has gone bad. In this instance, you’ll need to consult the manual of your owner for instructions on how to get a new fiat 500 key to reprogram the key fob.

The mechanical latch can be removed from the back of the key fob. (See the image below). Then, gently pull the edge of the battery holder away from the switch in order to remove the old coin-cell battery. Then, you can insert a brand new volt battery into the fob with the “+” side facing towards the rear cover of the key fob, and the “+” side facing down towards the rubber buttons.

Water Damage

Although the key fob has rubber seals that keep water from the chip, it’s not waterproof. A splash of water from rain or a wash cycle is likely to be fine but submerging the key fob in pool or ocean water will probably damage it.

If the key fob is exposed to water and stops working it will have to be reprogrammed. This process can be done by following the instructions in the owner’s manual or by bringing it to an auto locksmith professional or an Fiat dealer.

Another reason that a fob may stop working is if it’s out of range from your car. The range of a key fob is usually about 30 feet. If they are too far from the car, it may not recognize the fob. Start by moving closer to your car. If this fails, you may have to replace the key fob. There are battery replacement instructions for all vehicles on YouTube or in the owner’s manual. It is a good idea to think about getting a new key fob in case yours is beginning to appear worn and damaged.

Faulty Receiver Module

In the more modern versions of Fiat cars it is not necessary to have an actual key to open or start the car. These cars have a key fob that sends a wireless signal to the car, allowing it to turn off and on the engine. A locksmith can repair a broken keyfob. You can leave this task to the experts and save time and money. They can also create a new key for your Fiat.

If you’re looking to purchase a spare key for your Fiat vehicle, you’ll need to provide the locksmith details about your car over the phone. For instance, you’ll be required to mention the year of production of your car as well as the name of the model. This is crucial because locksmiths require it to ensure that the new key for fiat 500 key is compatible with the existing locks.

There are not many locksmiths who can make replacement keys for fiat 500 spare key cost cars. Find a locksmith with an established track record and experience in the field. This way, you can be sure that the new key will work with your vehicle and you won’t be wasting money.

Unpaired Key

If you have a keyfob that has isn’t working, the most frequent cause is the battery is dead. The key fob comes with metal clips which hold the battery in place and completes the circuit. If these clips wear out or loose, it can result in contact issues and then no power. Replace the battery with a fresh one with the same size, voltage and specifications, or a spare.

It is important to dry out the key fob when it has been submerged in liquid. This can be accomplished by using isopropyl or electronic cleaner. It is also recommended to remove the battery and clean the circuit board, and replace it prior to replacing.

Contacting locksmiths is the best solution if you cannot find a spare. A locksmith qualified to reprogram Fiat transponder keys is able to do this without needing to look at the original keys. This is a much faster and cheaper option than waiting for an original Fiat key from Italy to arrive. A professional locksmith will also have all the equipment and tools needed to complete a replacement in as little time as possible.