Bio-Fires – An Eco-Friendly Alternative to Real Fires

Biofires offer a warm, comfortable form of warmth with no harmful gasses or soot. They are easy to set up as an electrical fire.

The contract funded by BARDA supports the development of the BioFire Emerging CoV Panel, a nucleic acid amplification test for use with BioFire FilmArray Systems to identify human coronaviruses that are emerging and known in nasopharyngeal and oropharyngeal sw and saliva samples.

Eco-friendly

bioethanol fireplace log Burner (https://monroyhives.biz/author/bevhammond2/) is an eco-friendly alternative for gas or wood. The fuel is produced from plant by-products and a natural process converts sugars into alcohol. It is a better option than other fireplaces because it does not emit harmful emissions and also has less carbon footprint. Bioethanol is also a more secure alternative to other fires because it doesn’t produce smoke or soot. It doesn’t require a flue and can be used in the garden or home.

A multi-drug resistant (MDR) bacteria is among the most dangerous health threats of our time. Fortunately, modern testing methods can help detect MDR bacteria and other infections earlier to avoid further complications. BioFire FilmArray is one such test. This test employs the symptom driven approach to detect pathogens that can cause sepsis. The results are accessible within a matter of hours, so doctors can start treatment immediately.

The process of Molecular PCR that amplifies DNA or RNA molecules into millions or billions of copies. This allows the analysis of small quantities of body fluids or tissue to determine if specific genetic sequences are present. It is a valuable tool for laboratory professionals and can assist them to diagnose serious diseases in a cost-effective and efficient way. The BioFire FilmArray PCR system is a cutting-edge tool for infectious disease diagnosis and can be utilized to perform a variety of applications in laboratories and hospitals.

For tests of your respiratory system, you could wipe a swab over your nose prior to sending it to the lab. BioFire’s technology provides a rapid turnaround time and allows doctors to act quickly. This means that patients will have better outcomes and will not have to wait for the results.

The Chanouf Farm Biofire company has developed an agroforestry recycling unit which makes use of olive and pear waste to create biochar and biomass power. The products that result are offered to the public as a green alternative to traditional coal briquettes and wood charcoal. Bio-waste products are suitable to be burned in a Kachelofen-fire, which produces radiant heat and is a greener alternative to gas or electric fires.

Clean burning

By using a bio-fire, you not only save energy but also help the environment. Bioethanol’s combustion does not release harmful gases like carbon dioxide. It only releases heat and water vapour. This makes it a cleaner and safer alternative for indoor use.

Ethanol is produced by fermenting sugars in plants. It is a renewable source of fuel. It is produced in a short time and won’t be depleted like fossil fuels like oil and coal. Bioethanol helps reduce dependence on imports from foreign countries, and the risk of shortages.

Bio-fires are very easy to install and can be utilized in existing fireplaces or as a freestanding unit. This makes them a convenient alternative to wood and gas fires. They are an excellent choice for homes and offices that do not have chimneys.

When a bio-fire is ignited, a special media is created inside the burner to absorb the liquid ethanol fireplace burner fuel while making it available for combustion. The ethanol is ignited by the flames, and the vapours are emitted out into the atmosphere through the vent. This gives the flames a more natural look and a captivating beauty that cannot be duplicated by wood or gas fires.

Another advantage of bio-fires is that they don’t need a flue or vent to replenish the oxygen used during combustion. They also don’t create the carbon monoxide that must be vented out into the room in gas fires with open fronts.

The BioFire Respiratory panel uses multiplex PCR to simultaneously test for respiratory pathogens. This takes about an hour. This allows doctors to detect and rule out respiratory illnesses quicker than they could by using standard lab tests that require patient visits. Both the patient as well as the health system gain from this.

Safe indoors

Bio-fires are safer to use indoors than real fires, since they produce no smoke or carcinogenic fumes. They don’t release carbon monoxide that can be deadly if inhaled. The bio-ethanol biofuel fireplace fuel used in them is flammable however it is important to be careful when handling the burner and refilling your fire. The fuel should only be added after the burner has been switched off and your fire has cooled. Any spills need to be cleaned immediately.

The company’s diagnostic FilmArray system – BioFire Torch and BioFire 2.0–are easy-to-use and can run eight different diagnostic panels approved by the US Food and Drug Administration, three additional panels authorized for use in emergencies, and six environmental test panel. These tests include a respiratory panel that was developed to quickly identify and discriminate respiratory illnesses such as COVID-19. emerging coronaviruses, and COVID-19.

The COVID-19 panel has been awarded a grant by the Biomedical Advanced Research and Development Initiative (BARDI), which is part of the US Department of Defense’s Strategic Access Program. The COVID-19 system is based upon antigens, which allows physicians to differentiate symptoms caused by COVID-19 from other respiratory illnesses. This test has similar accuracy to the rapid antigen tests that are currently in use.

Additionally the company is in the process of developing a SARS-CoV-2 assay for its Respiratory 2.1 Panel. The multiplexed nucleic acid test for amplification will be available on the BioFire filmArray 2.0 and Torch Systems and will detect SARS CoV-2 and 21 respiratory pathogens from nasopharyngeal and saliva samples in less than an hour. The assay is being developed in a accelerated timeline, and submission to the FDA for EUA and 510(k) clearance is expected in the third quarter of 2020.

Although bio-ethanol fireplace flame-effect fires are extremely safe to use, they must be kept away from combustible materials like pillows, blankets, and curtains. They should not be set near anything that may catch fire and you should keep flammable objects at least 10 feet from them. The bioethanol fuel should be stored in a place that is dry and secure so that children or pets cannot easily reach it.

Simple to use

The bioethanol fireplace does not have a chimney to worry about. You only need a place to store the fuel and a place to store it. Once you’ve filled the burner with fuel, light it. This will give the appearance of a real flame. Once the flame is started, it will heat the room but with very little or no smoke. It will also produce heat like a fireplace that burns wood. They are also easy to maintain and do not require any maintenance. Just a quick clean is all they require.

In contrast to other tests that are quick however, the BioFire RP2.1-EZ test uses a syndromic approach to identify the most common signs of infection and returns results in just 45 minutes. The test is for patients suffering from upper respiratory symptoms and has a sensitivity rate of 98 percent. The test can detect 19 viruses and 3 bacteria in a single sample which makes it a great choice for patient management.

The BioFire platform combines multiplex testing, sample preparation and result reporting in one integrated platform. This allows laboratories to simplify their workflow and eliminate the need for a serial method that involves sending out individual tests. This can lead to better patient outcomes, by allowing the right test to be administered the first time and by removing the need for costly tests based on culture. The BioFire system is able to detect pathogens at the cell level as well as their antimicrobial resistance gene. This information is more sensitive than the conventional methods.

Molecular diagnostics are increasingly used to improve patient care and outcomes. The BioFire panel RP2.1+ uses an syndromic approach to simultaneously focus on 23 pathogens that are often implicated in respiratory illnesses. The test is available on the BioFire film array 2.0 and Torch systems, and can provide results in just 45 minutes.

In the US, this assay is currently available under FDA Emergency Use Authorization (EUA) and will be made commercially available after the initial DoD demand is met. The BioFire Defense team has developed a fully automated sample-to-result assay for the rapid identification of COVID-19. This assay is in development and will be available when initial DoD demands are fulfilled.